Quick Jump To » Comments

DIY homemade white dinosaur serving tray

So… I have a major crush on this super fun & oh-so-clever project by Gretchen of Three Little Monkeys Studio! Her playful DIY Dinosaur Serving Dish is simple to make – you just need to a little patience to allow for curing time. It’s affordable too! You can upcycle old toys and melamine plates from the toddler days, or pick up items from your local Dollar Store or Target’s $1 spot.

This concept can easily be applied to other playful critters too… think bunnies for Easter, owls or black cats for Halloween, or reindeer for Christmas. Read on for step-by-step details on how to bring this playful idea to life yourself!

*****

DIY DINOSAUR SERVING DISH

by Gretchen

Takes 2-3 days with curing time

MATERIALS

– hard plastic dinosaur (it needs to be sturdy and balanced)
– small melamine plate
– sand paper
– adhesive*
– spray paint
– hand held saw
– parchment paper

All of the materials needed to make your own dinosaur serving dish

STEP BY STEP INSTRUCTIONS

1. Use the handsaw to cut off your dinosaur’s head just above the shoulders. Make a level cut. Use sandpaper to smooth the edges (it will be rough).

Step 1 of making a DIY dinosaur serving platter

2. Lightly sand the surface of the plate on the bottom and top where you will be adhering the dinosaur. No need to sand the entire surface.

3. Apply your adhesive to the body of the dinosaur and plate. My adhesive* recommends applying to both items you want to glue together, and allow them to set for 5-10 minutes BEFORE adhering.

4. When ready, attach the plate to the body. Touch ups can be done around the glue site with a damp paper towel. Allow to cure for 24 hours.

5. Once the body and plate have dried and cured, prep the dinosaur’s head and attach to the plate. You will need to eyeball it from the side and front before attaching to make sure it is centered in the right spot. Perform any touch ups and allow to cure for 24 hours.

6. Once completely dried, spray paint from all angles and underneath. I like to spray one coat at a time every 20 minutes or so to avoid drips and get the best coverage.

7. Once your dinosaur is dry, enjoy**!

* I used Loctite Stik’N Seal.

** Please note that food should NOT come into contact with paint. Line the plate with parchment paper and cut to fit.

The finished look of the DIY dinosaur serving tray

You can find more of Gretchen’s adorable DIYs on her blog, as well as custom printables at Three Little Monkeys Studio.

Save